Re-Purposing Broken Candles + Recycling Tea Lights

Have you ever had a favorite candle with wick problems? It burns funny and the wick gets buried in wax and it will no longer burn? Or you’ve reached the bottom of the candle, the wick is gone, but there’s still a lot of wonderfully scented wax left? Or, do you go through a lot of tealights and feel bad about the waste they create? Before you throw away those misfit candles, save your empty/used tea light containers, and keep reading! You can reuse all of them!

IMG_7407.jpg

MATERIALS NEEDED:

Option One - If you have a lot of wax left and want to make a big candle

This is great if you have a lot of wax left. I did this with a candle that stopped working shortly after I bought it. There was about 3/4 of the wax left but the wick was shot.

Step 1. Preheat the oven to 180º and place the candle you wish to re-purpose upside down in a glass bowl. Pop it in the oven for a few minutes (5-10) and shortly after, the wax will melt on the sides of the jar and will separate from the glass. If you have a jar with straight sides, it will plop right out and you can take the old candle jar out of the oven and skip to step 2. If you have a jar with curved sides, you will have to leave it in the oven until all the wax melts out. This will take anywhere from 10-30 minutes depending on the kind of wax and how much you have. I set a timer for every 10 minutes and kept checking.

Step 2. While you’re waiting for the wax to melt, set up your candle. If you are reusing the original jar, clean it out with paper towel. If there are remaining bits of wax in the jar, you can stick it in the freezer and they will chip right out. Once your jar is cleaned, stick your wick in the bottom making sure it’s centered.

Step 3. Once the wax is completely melted, take it out of the oven and slowly pour it into your jar and let sit until completely hardened. If you are using a standard wick, you will want to make sure it stays centered from the bottom of the jar all the way to the top. You can do this by laying a clothes pin over the top and sticking the wick through the hole in the middle. If the jar opening is too big, just lay two knives across the top to support the wick.

Note: Let candles cool completely before lighting them. It’s best to wait 24 hours.

Option Two - If you just have a little wax left and want to fill tealights

With this method, you can remove the wax from the jar and put it into used (or new) tealight containers.

Step 1. Preheat the oven to 180º and place the candle you wish to re-purpose upside down in a glass bowl. Pop it in the oven for a few minutes (5-10) and shortly after, the wax will melt on the sides of the jar and will separate from the glass. If you have a jar with straight sides, it will plop right out and you can take the old candle jar out of the oven and skip to step 2. If you have a jar with curved sides, you will have to leave it in the oven until all the wax melts out. This will take anywhere from 10-30 minutes depending on the kind of wax and how much you have. I set a timer for every 10 minutes and kept checking.

Step 2. Set up your tea light tins. Lay down some wax paper or a double layer of paper towel and line them up. Stick the wick in the middle. If you purchased wicks that are too long, trim them down to be about a half inch taller than the tin.

IMG_7411.JPG

https://woodenwick.com/

Stephanie Baker